260mm Track Saw Square Right Angle Circular Saw Guide Rail Angle Stop Compatible with Festool and Makita Guide Rail

Product Information

Quote from: GoingMyWay on November 25, 2020, 09:46 AM You probably need to resize your images so they are smaller. The cheaper saw does the same job as the more expensive saw, it just doesn't have the refinement of the more expensive saw. I tried mine for breaking down sheets and for long cuts with two Makita rails, when I compared to a known square and my measured pencil marks it was close, but out sufficiently that I always had to fiddle it around. I also wanted a hybrid square because I use two different brand saws rails however there wasn’t any in the market. I know guys who use a rail square for full length rips, but I wouldn’t personally, for all the reasons mentioned further up in this thread.

To give you an idea, my cordless makita track saw doesn't cut square unless I set depth of cut to at least material thickness + 8mm (normally I had used +6mm and never questioned it). The vacuum hose guides stop your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging.I’m trying to get all the squares together for a ‘rail square roundup’ vid, as the choice and differences between them is a bit baffling tbh. Note there has been some controversy in Festool forums about the Insta-Rail, and issues with intellectual property, largely because of how closely it resembles the GRS products. That is absolutely doable and if you are cutting the same widths repeatedly it may well be a better option. TaigaTools Precsision Rail Square – Anodized aluminum, triple-locking mechanism, does not use a latch.

The ratings/reviews displayed here may not be representative of every listing on this page, or of every review for these listings. TSO makes one of the best in my opinion , and has lots of add ons for it should you need or want their capability. com, the Sell on Etsy app, and the Etsy app, as well as the electricity that powers Etsy’s global offices and employees working remotely from home in the US.Below I have outlined most of the track/rail square options available, which I investigated prior to making a choice.

If you are joining two rails together to make the 8' cut make sure those rails are accurately joined together. Some of the technologies we use are necessary for critical functions like security and site integrity, account authentication, security and privacy preferences, internal site usage and maintenance data, and to make the site work correctly for browsing and transactions. Even if the TSO square or any of them was perfectly accurate at 90 degrees, a slight difference in pressure on the square or a slight variation in straight along the reference edge of the board is going to be magnified by 10x (?To make more cuts just move guide rail, align rail by pressing square’s edge to material’s edge and cut again!