On bare or stripped woods, Sand the surface to a smooth finish in the direction of the grain. Stain the wood if necessary. On open grained woods, you can stain and seal using a Shellac Sealer, but this is optional. Apply the Supreme wax using very fine 0000 wire wool or buffing cloth in the direction of the grain and allow soaking into the wood. Remove any excess and then once dry, buff to the desired sheen level. Several coats may be added to build further sheen and protection. This can be used on all bare interior woods or furniture. Fiddes Supreme Wax is almost odour free, applies easily and once polished to the desired sheen level, gives a depth of finish that revives and protects any original shiny surface while preserving the patina. The Clear / Light variant is suitable for use as a final finish after using Fiddes Liming Wax. Take a clean cotton cloth, sponge or brush and apply in the direction of the wood grain where possible. To obtain a uniform colour, always wipe evenly, blending the Supreme Wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Supreme Wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern. Our beautifully handcrafted Chunky X Frame rustic dining table combines characterful rustic wood with an industrial style steel frame to create statement pieces of furniture.

The application of additional coats will deepen the existing colour / shade and significantly enhance the resulting sheen level. Rugger Brown – This is a tone of brown mainly used on hardwoods such as Oak and Walnut but is also a good alternative on Elm and Pine woods for a slightly darker shade. We have a 30-day return policy, which means you have 30 days after receiving your item to request a return. Our floating shelves are only suitable for solid walls and providing they are installed into this surface with the fitting’s supplied, they can hold up to 35kg.For best results, we recommend cleaning the surface first using Priory Polish Reviver using very fine wire wool. This will remove the dirt, grease ready for treatment of the wax finish. This will also give you the best sheen and add to the depth of the colour and finish. Made from the highest quality Kiln dried European Oak which contains fewer knots or sap which cheaper picture ledges on the market often use.

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. Available colours: Clear/Light, Antique Brown, Cherry, Forest Brown, Jacobean, Rugger Brown, Stripped Pine

What colour wax should I use?

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer’s instructions on the tin at all times. When maintaining pre-waxed wood it is advisable to use a clear wax (Fiddes have a very lightly tinted wax called 'Light' for paler, wood coloured surfaces and a wax with no pigment at all called 'Clear' for painted surfaces or for surfaces which require no colour change). Additional coats offer an improved patina and overall durability. Fresh wax coats can be applied annually or as required. Repair