LIQUI MOLY Battery Clamp Grease | 50 g | Calcium Fat | Lubricating Fat | SKU: 3140

Product Information

We offer the world's widest, deepest range of motor and gear oils, fuel and oil additives, care products, chemical problem-solvers and service products. Procycle Battery Terminal Grease ensures reliable starting and bright lighting, and also extends the life of your battery. Inevitably, you got some little splashes around the battery, which helped to terminals to corrode rapidly unless they were greased. If you do decide to then before making your connection to the battery, first smear petroleum jelly (eg Vaseline) over the terminal post then wipe the excess around the connector/post after tightning. The TLGB 20 can deliver pressures up to 700 bar (10000 psi) and features a built-in light to illuminate the work area.

If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months.

Surely putting grease on battery posts will result in a very bad electrical connection - but that is what everyone recommends. iwocaPay is an affordable payment solution that allows Limited companies to get the equipment they need without large upfront costs. Yes, you might have to keep a normal grease gun for the odd hard to get to spot, but you can get a G coupler into most places in my experience.

Dewalt would be top of the list as I already have some Dewalt and Facom stuff so the extra battery would be handy. As for a perfect vacuum being a conductor - do you know how the cathode ray tube in your tele works? Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease. Some mention that it stops corrosion, and is good grease for stopping battery terminals corroding, while others say that it's battery terminal grease. The tool's display indicates battery charge level, amount of grease dispensed, pump/motor speed and blocked lubrication points.The reason why battery terminals were greased was to protect them from the corrosive gases given off from unsealed batteries whilst they were charging. Our experienced maintenance equipment specialists are on hand to offer practical solutions to your problems and can assist with an on-site visit. Might be enough grease on the the clamps already but just wondered what to use if i need to smear more on.