Our internal tests have shown that the Dremel 8260/8250 can maintain the high RPMs at high load, resulting in a faster work completion rate than the 8240/8220 and m12. So what we see from the results is that the battery Amp Hour capacity significantly affects the time required to cut down half an inch rebar. Now let’s discuss the retail prices for each tool, which can vary from time to time or from one platform to another. The sound levels will be much higher when you cut or grind something with it, so get ready for that. 10. Retail Price

So a 1.5 amp hour battery with a c rating (Discharge rating) of 10 can deliver a max output power of 180 W. So, we can see that the Milwaukee charging speed is quite good compared to the Dremel charging speeds. 8. Spare Batteries & Chargers The C12RT Cordless Rotary Tool utilizes a powerful 12V motor to produce unmatched performance and increased run-time. The size and versatility make it an essential tool for Maintenance Contractors, Electricians, Plumbers and more. The tool runs from 5,000-32,000 RPM and is managed by a variable speed dial for precise control.

Specifications

Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice. For Further Information

Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online) On the other hand, a 6 amp-hour battery with a C rating of 10 can deliver a max output power of 720 W. Special event, club or membership offers, third party promotions or prices not available to the general public The Milwaukee seems to be wasting a lot of power on cooling the tool, but running it at higher loads pays off. 7. Charging time Total Tools reserve the right to change or withdraw free delivery at any time. Estimated Delivery Timeframes

On the other hand, Milwaukee uses the same m12 series batteries and chargers for their rotary tool, a plus sign for those already invested in m12 series Milwaukee tools. These tools have a noise level of 84-89 dB at a distance of 10 cm, which I think is not a deciding feature. However, t he no-load max RPM does not translate to the actual output power each drill can deliver. So to get an idea of how long each tool works on a single charge, we tested each at an idle load of 5000 RPM. Here are the results. Tool When Dremel 8220 was introduced, the biggest complaint was acquiring spare batteries and chargers. Dremel used proprietary connectors and batteries, which were very hard to source.

To understand the capability of these rotary tools, we tested them by cutting a half-inch rebar. Below is how it performed. ToolCharging time is one of the most solid reasons for selecting the Milwaukee M 12 rotary tool over the Dremel. So if you already have m12 Milwaukee tools and batteries, you should consider getting the m12 rotary tool as you won’t have to spend money on charges and batteries. 9. Noise It depends on the power of the motor, battery capacity, the cooling system’s efficiency, and the tool’s robustness. Tool Since all of them have different battery sizes, the run duration is not a very accurate test but will give you a good idea about how much power the electric motor is withdrawing at no load.