Advise householders that concealing a TRV with furniture or behind a curtain will affect the performance of their system, making it less reliable as the TRV cannot accurately sense the temperature of the room. Advising customers on room thermostat settings There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly.

The acclimatisation time for one of these units is approximately 4 degrees an hour or 1 degree every 15 minutes, meaning it could take several hours to reach the required temperature for the first time. Finding a compatible replacement programmer Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners?It can sometimes be necessary to replace the TRV head to provide improved control or to simply enhance the radiator appearance and this can be done without changing the entire valve body. When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat). The Green Premium eco-mark stands for complete, transparent, and easily available information about products

The thermostat can be mounted to the stand or to the wall clip in a location where it will be able to control the room temperature. When wall mounting, the thermostat should be placed around 1.2m (4ft) off the ground and away from windows and radiators. On the controller, navigate to ‘signal strength’ through the settings on the screen. On the thermostat, press and hold the + and – buttons for five seconds, then navigate to signal strength To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers?

LP722Si

It’s also worth making sure that the householder understands that altering the temperature on a room thermostat will only be effective if a programmer has set the heating to be on. If the homeowner wants the heating on when the programmer has it set to be off, they need to understand they have three options:

Hold the transmitter unit 2 metres away from the SCR unit and then replace the batteries in the transmitter.When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. To do this, first drain down the system, then un-screw the TRV head, and use Drayton’s universal grey tool to remove the valve insert before cleaning below it. System balancing by TRV They can ‘advance’ the heating, which means the programmer will skip to the next ‘on schedule’ and the heating will remain on until that programme is due to end.