HP JL258A ARUBA 2930F 8G POE+ 2SFP+ SWITCH

Product Information

The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (default is to use 25G transceivers / DACs). UL 69050-1: 2nd Edition; EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013; IEC 60950-1:2005 +A1:2009 +A2:2013; CSA 22.2 No. 60950-1-07 2nd; EN 60825-1:2014 / IEC 60825- 1:2014 Class 1 Switch - Includes eight RJ45 10/100/1000Mb autosensing ports, two 1G/10G Small Form-factor Pluggable Plus (SFP) ports, RJ45 / mini-USB console port, and DC receptacle - Accepts 100Mb (100-FX), 1Gb (SFP), and 10Gb (SFP+) transceivers The 8325 requires configuration of interface groups (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Premier Flex Multimode OM4 LC/LC Fiber Optic cable, 1.0m (3.28ft) long - Duplex zipcord graded index 50/125um multimode 'bendable' fiber optic cable with LC/MPO connectors on each end (Blue Color) - Optical performance: 4700MHz/km

Features and Benefits:

The 25G module (JL687A) requires configuration of interface groups (groups of four ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (Interface Groups default to 25G speed).

speed is NOT supported for the J8177D when used in any port (SFP+, SFP28, or SFP56) on teh 6400 series. Only the J8177D is supported (J8177C not supported). J8177D or JL747A can only operate at 1G in the 10000 series.

For J9263A, J9264A: K.14.03 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483)

switch - Includes eight RJ45 10/100/1000Mb autosensing ports, two 1G/10G Small Form-factor Pluggable Plus (SFP) ports, RJ45 / mini-USB console port, and DC receptacle - Accepts 100Mb (100-FX), 1Gb (SFP), and 10Gb (SFP+) transceivers UL 69050-1: 2nd Edition; EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013; IEC 60950-1:2005 +A1:2009 +A2:2013; CSA 22.2 No. 60950-1-07 2nd; EN 60825-1:2007 / IEC 60825-1:2007 Class 1 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ 1/10GbE ports; PHY-less J8177C/D or JL474A will have a delay (~15 secs) before link up or down is properly displayed when a cable is inserted or removed.IEEE 802.1AB Link Layer Discovery Protocol (LLDP) facilitates easy mapping using network management applications with LLDP automated device discovery protocol

J8177C/J8177D are not supported for use in the Dual-Personality ports of the 2930M Series Switches. The use of Gigabit SFP copper transceiver modules in a switch with only SFP or SFP+ ports, provides IEEE 802.3ab compliance. Specifications for SFP copper transceiver modules Product name (SKU) Dual Core ARM Coretex @ 1016 MHz (48G models) or Dual Core ARM Coretex A9 @ 1016 MHz (8G/24G models) Optimized for mobile users with an integrated wired and wireless approach, these reliable Layer 3 switches are easy to deploy and manage. Premier Flex Multimode OM4 LC/LC Fiber Optic cable, 50m (164ft) long - Duplex zipcord graded index 50/125um multimode 'bendable' fiber optic cable with LC/MPO connectors on each end (Blue Color) - Optical performance: 4700MHz/km

For use in the SFP⁠+ ports of the JL075A 3810M switch. Also used in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module installed. X242 10Gb SFP+ to SFP+ 1.0m (3.28ft) Direct Attach Copper Cable - 10 Gigabit Ethernet, 100 Ohm cable with Small Form-factor Pluggable Plus (SFP+) connectors permanently attached to each end X111 100Mb SFP LC FX transceiver - Small form-factor Pluggable (SFP) FX transceiver that provides up to 2km (1.24 miles) full duplex or 412m (1352ft) half duplex - Has one LC 100BASE-FX port Multimode OM3 LC/LC Fiber Optic cable, 50m (164ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km