Facom 82H.15 Short Allen Key, 15 mm.

Product Information

Ball end hex keys Ball ended hex keys allow access to fasteners in tighter spaces, giving the user an in creased range of angles from which to access the part thanks to its rounded hexagonal bulb-shaped head. Like all hex wrenches, long-reach Allen keys are also sold with a variety of head and handle types for various more specialised applications - these can include: Long-reach Allen keys are a common feature of most good quality hex key sets, which tend to include a useful range of common wrench sizes and diameters (typically from around 1-1.5mm, up to 12mm and beyond). Don’t get confused by dust caps on the outside face of the pedal – these are used for servicing. Laura Dow / Immediate Media

Lastly, there’s one other added benefit to having both SAE & metric hex keys. In the United States, larger metric half sizes like 6.5 mm aren’t standard in most hex key sets. However, the 1/4″ SAE hex wrench will likely work in place of a 6.5 mm wrench. In scenarios like these, use the chart to estimate the correct alternative. You can test different sizes till you find the best match. We do recommend starting slowly to ensure that you don’t damage the hardware. T-handle hex keys The T-handle feature a good grip thanks to the shape of its handle, from where it gets its moniker, allowing for significantly increased torque. Did you know that most people use the wrong screwdriver for the job? It’s essential to distinguish between the various screwdriver types and know what screw you’re using. A set from Halfords will include a variety of screwdrivers for slotted head screws, Phillips drive screws and Pozidriv screws, perfect for any job. Impact drivers & screw bits

There are a few variations of hex keys available, the most common and the one that is synonymous with the tern Allen key is the L-shaped hex key. To help choose the right key for the job we have outlined the most common types below as well as a few of their features and benefits. Hex keys also referred to as Allen keys or Allen wrenches are used in the application of loosening and tightening hexagonal fasteners. They are used in a variety of industries and are also a handy domestic tool with many uses. They are available in a number of different sizes with both imperial and metric variations available. Hex keys are available in many different sizes and in both imperial and metric measurements. The size needed will depend on the size of fastener you're working with.

Straight hex keys These resemble screwdrivers and function in much the same way except the head features either a flat or ball ended hex key, instead of the traditional screwdriver bit. L-shaped hex keys The most common type of hex key. The L-shaped key is double ended allowing you to use torque to tighten and loosen fasteners with the short end, whilst the long end can be used in the same way as a straight key.Note you always fit or remove pedals from the crank end of the pedal spindle. If your pedals have a bolt, cap or screw on the outside end of the pedal spindle, this is only used to service the bearings. Left vs right pedals explained – what are the differences? When removing pedals, you will always be turning the spindle of the pedal towards the rear of the bike.