Sky MINI SD501 Wireless Connector

Product Information

The usb one only works on the newer boxes, I got one and sky had to send the Ethernet version for it to work on my box. I’ll show you how to set Ethernet up on the main box, but I’m not going to cover how to make your entire system Ethernet-based: this is a specialist setup for when there’s a massive issue with getting wireless to work properly and should only be done by a Sky engineer. 1. Connect your main box If you don’t have Sky broadband, you won’t have a Sky Q Hub. The default installation option is to have the main Sky box connected to your existing 2.4GHz network for internet access. Additional Sky Q Mini boxes connect to your 2.4GHz network and also to a hidden 5GHz mesh network. 1. Connect your main box your network You need to connect your main Sky Q box to your Hub properly. To ensure there’s a connection, go to Settings, Network, Setup and select Reset and then Confirm. Follow the onscreen instructions to set up your main box, connecting it via the WPS buttons on the router and Sky Q box: press the WPS button on the router for a couple of seconds, and then press the WPS button on the Sky Q box for a couple of seconds (it’s the button on the far right).

up your new Wireless Connector Look inside to see how to set up your new Wireless Connector

I assume you haven't got an Ethernet cable connected to the Sky box, if you have disconnect it or the box won't recognise the wi-fi box. Before we get into the real details, however, it’s worth explaining how the system works.In our experience and from reading all the various advice on forum threads, the problems are largely caused by changes being made to a system that upset the way the Sky Q mesh network behaves. Tweak things the wrong way and it can cause issues with, or bypass completely, the mesh network used for streaming. We’ll explain why problems occur and, in the later sections of this article, how to properly configure your Sky Q system. Read on for the full story or jump straight to the bit you’re interested in using the links below. It can, however, be a little fussy about the way you set it up, particularly if you decide you’d rather get your broadband from another provider. If you’ve been having a few problems with the system cutting out, then we’re here to help with our guide to getting those problems sorted out. As robust as this system is, problems start to occur if you want to make changes. One of the most common ones is that people think that their Mini boxes are connected to a 2.4GHz network, so reset them, only to find that they can’t see their existing 5GHz network. This is entirely normal, as your existing 5GHz network doesn’t have the Quality of Service (QoS) or mesh networking abilities that Sky Q needs. This is why a hidden network is created. callmediva, to find the details of your box press "services" then the right arrow to go to "settings", then "select" and then the number 3 to go to the "details" tab.USB version works fine on my DRX895, so you mean only works on "newer" than DRX890/895? Hard to belive but many of these boxes are now into their 5th year of operation . Mesh networks are often slower than a traditional network, but add reliability and boost overall coverage. For Sky Q, the latter points are the most important, as you only need enough bandwidth to stream HD and reliability is more important than speed. How the mesh network works depends on whether you have Sky broadband and a Sky Q hub, or a regular broadband connection. Please be wary of advice about disabling the 2.4GHz network, though. If you’ve got the Sky Q Hub, your router also acts as part of the mesh network, and you get an additional feature: your Mini boxes act as Wi-Fi hotspots, repeating the same network name around your house and improving coverage. With this system, both the 2.4GHz and 5GHz networks have the same name. I don't think the original Ethernet connected Sky wi-fi adapter boxes had that function, but I could be wrong.

mini wireless connector | Sky Community WiFi signal to mini wireless connector | Sky Community

While this does mean you can’t choose which network to connect to (2.4GHz or 5GHz), the system is supposed to intelligently choose which network your device should connect to.Connecting your main box via Ethernet can also cause problems, as you have to properly reconnect all of your Mini boxes and Boosters to your network, so that the mesh network can be rebuilt. The next mistake is that Mini boxes are then connected directly to the 2.4GHz network, as there seems to be no other option. Doing this joins the Mini to your 2.4GHz network only, and makes streaming unreliable and prone to interference.One common problem is that people split the wireless networks, using the option in the Sky Q Hub’s networking settings, so that they can physically choose which network to join: the 5GHz network has less range, but is considerably faster. However, doing this causes problems, as it breaks down the mesh network and can force Sky Q Mini boxes to connect via 2.4GHz networks. For a stable system, you have to use the default settings. Sky Q is a highly impressive TV platform, especially in its multiroom format. It uses Wi-Fi to pump content around your house from TV box to TV box and can even be used as a mesh Wi-Fi system to ensure you have no dead spots at home. The pace, Samsung and DRX780 initially weren't conpatibel because they hadn't received the R007 firmware update which added support for the mini connector. When you SERVICES 0 5 what's displayed, it should look like this: http://media.t3.com/img/resized/sk/xl_Sky%2B-HD-Wi-Fi-3-624.jpg No, it looks nothing like that, it looks like all the other text based menus. I'll try another beetroot, I mean reboot, and see if that works,if not illI'll do the forced update

SKY HD WIRELESS WiFi MINI USB ADAPTER FOR - Midland sky SD501 SKY HD WIRELESS WiFi MINI USB ADAPTER FOR - Midland sky

One of the main pieces of advice in the forums is to disable the 2.4GHz modes on the Sky Q Mini boxes. This forces the boxes to use 5GHz networking, which sounds great, but you shouldn’t have to do this at all. In fact, in a properly set up Sky Q system, all streaming is performed over 5GHz, and 2.4GHz is only used for Wi-Fi hotspots, as a failover and for some updates. In other words, streaming problems are not caused by the 2.4GHz network! An SD501 connects for both power and broadband via the box's USB port, as @TimmyBGoodposted, so if your box doesn't have a USB port, an SD501 definitely isn't compatible. I think I recall that some earlier Sky+HD boxes (possibly DRX780, Pace and Samsung boxes?) that do have a USB port aren't compatible either. If you have Sky broadband, your Sky Q Mini boxes will act as Wi-Fi hotspots. This is mostly a good thing, but some people have had problems where devices ping between the Mini’s Wi-Fi and your router’s Wi-Fi, which can cause connectivity problems for some devices. In this case, you may want to temporarily disable 2.4GHz networking to see if it fixes your problems. Be aware that this will mean your hotspot is only working on the 5GHz band, so connecting other devices to it may impact bandwidth and cause streaming problems. In other words, be really careful before you decide to disable 2.4GHz. it will take you to the network tab , then press the down arrow you will see an option at the bottom red button Reset , press the red button and follow the promptsIt’s a little harder to tell if your Sky Q Mini box is connected to the mesh network, as viewing the network settings will just show you that it’s connected to your home’s 2.4GHz network. So, the easiest option is to go to Settings, Network, Setup and select the Reset option and then select Confirm. A secondary problem is deciding to connect your main Sky box via Ethernet, as this can interfere with your mesh network. If you decide to use Ethernet from your main box, you need to properly configure your entire system again. This will disable 2.4GHz network connections, forcing the rest of the system to use the 5GHz band. If you’re streaming to tablets, you use your regular network connection and aren’t technically part of the mesh network. Any drop-outs or issues here will come purely down to the quality of your network connection and your network speed. If you’ve got Sky Broadband, you shouldn’t have problems, as all of the Mini boxes act as hotspots. If you don’t have Sky broadband, read my guide on how to extend Wi-Fi range. According to sky's own troubleshooting steps, the on box wireless support option should be present if a Wireless Connector mini is detected. There’s a good chance that the Sky Q Booster isn’t workingif you’ve made other network changes. To fix this, press and hold the reset button on the rear until the power LED starts to flash. Wait until the wireless LED turns a solid green, then press and hold the WPS button (far right) on your Sky Q box until it flashes amber. Now, press and hold the WPS button on the Booster until it flashes amber. When the connected light turns on, your Booster is ready to go. Make sure the Booster is where the engineer located it.