DrayTek Vigor167 modem 30000 Kbit/s

Product Information

The Vigor167 comes with a new chipset and supports Annex-A and Annex-B in one device for the first time. All DSL connection cables for various regions are already included in the scope of delivery. For example TAE-F-to-RJ11 cable, RJ11-to-RJ11 cable, RJ11-to-RJ45 cable.

Draytek! Introducing the Vigor 167 – ProVu Blog NEW from Draytek! Introducing the Vigor 167 – ProVu Blog

The TCP port has been changed. By default, HTTP uses port 80, but you can deliberatelychange that. If you have done so, you need to append the port number to the URL, for example http://192.168.1.1:88. Introducing the very latest in the DrayTek Vigor 160 range, the Vigor 167! An ideal alternative to the popular Vigor 130 Modem router, the Vigor 167 offers all the same features and functionalities with 2 Gigabit LAN network ports and a built-in basic router with DCHP server.It should also be noted that with regard to ADSL, both the variants Annex-A and Annex-B are combined in one device for the first time, which also further increases the possibilities for using the modem. any client behind Openwrt can reach the Draytek on 192.168.0.1 (or any of Draytek's devices on that network) (unless something really screwy on your configs but, out of the box, ANY pair of routers will behave like this. In any problem state, it's usually best to use a wired (RJ45/Ethernet) connection rather than wireless. If you cannot access the web interface of your Vigor router, here are some possible causes: Seems to be a rev-up of existing Vigor 165 - with some indication that the Vigor 165 will be replaced in the lineup. The Vigor 166 remains as is - it has a different chipset, the chipset that supports G.FAST connections. Vigor167 product news 9-april-2021 In German, but (basic) translation below: https://www.draytek.de/aktuelle-news-lesen/items/vigor167-neu-annexa-telekom-testcenter-annexb-modem-supervectoring.html

Vigor167 35b Modem Quick Start Guide - DrayTek

Overall, conformity has also been increased, with ITU-T G.992.1 ADSL G.dmt, G.992.3 ADSL2 G.dmt.bis, G.992.5 ADSL2 +, G.993.1 VDSL, G.993.2 VDSL2, G.993.5 vectoring, G.997.1 supported. The Vigor167 replaces the Vigor165, the Vigor166 remains available as a G.Fast modem. This has to do with the fact that there is no chipset that supports ADSL and G.Fast at the same time, as both have a similar frequency spectrum and interference could occur. Thus there is the Vigor167 for ADSL / VDSL / supervectoring connections, the Vigor166 serves G.Fast connections with 106Mhz and 212MHz

I am using the same DNS, same router (vigor just set up as a bridge modem, same as the old TP-Link). Did you know we can configure this item prior to shipment meaning it will automatically work out of the box. Using our TR-069 provisioning platform, we can pre-configure generic and customer specific settings prior to despatch. View more information about our router provisioning. if you open the web console (middle button on the top right next to the floppy disk symbol) and type vdsl status it will tell you the path mode and interleave.

Vigor167 – DrayTek Australia Vigor167 – DrayTek Australia

The modem also has two Gigabit Ethernet LAN ports and, in addition to the power supply unit, the necessary connection cables such as 1x RJ11 to RJ11, 1x TAE to RJ11 and 1x RJ11 to RJ45 are enclosed with the device. ANSI T1.413 Issue2 and VDSL Band Plan 997.998 are also available and the VDSL profiles: 8a, 8b, 8c, 8d, 12A, 12b, 17a, 30a and 35b are taken into account. Something that caught my eye is there seems to be 2 G.Fast options, since i don't know what's what I've left as default... When running the tp link theres no noticeable line drops or anything, if anything its better – I think the draytek is being a bit too conservative. It has support for ADSL (not enabled in this current firmware), VDSL and G.Fast so i think can be considered a all in one replacement for those on VDSL but thinking of going G.Fast if they are not on the list for full fibre (yet).As I understand it, the Draytek is connected via its modem to FTTN and the routing/switching function is active on all the LAN ports.

Vigor167 | DrayTek

Extensively tested to meet your expectations, the Vigor 167 provides a reliable and secure DSL connection and is compatible with all current UK UDSL2/ADSL+ networks. Ideal partner device for DrayTek dual-WAN products or any other vendor's Ethernet WAN firewall. Reports DSL Line Status on DrayTek Vigor routers.The Vigor167 is a modem for supervectoring profile 35b and all common VDSL and ADSL variants via profile 17a, with and without vectoring, up to DSL light with 384 kbit / s. The modem is suitable for both older connections and the new All-IP BNG connections. If your end device does not support VLAN tagging, our Vigor167 modem also compensates for this and can do the tagging for you. Standard (plaintext) HTTP is disabled, and encrypted TLS/SSL is in use. Use a https prefix to access the router WUI using SSL/TLS. The Vigor 167 is VDSL2 35b and ADSL2+ modem to Ethernet bridge, connecting VDSL or ADSL to your Ethernet-based Router or Firewall. It provides proven compatibility with UK VDSL2 and ADSL2+ networks.